I/O Gateway has been replaced with Edge IO
The I/O Gateway will continue to be fully supported by Tulip with recurring software and firmware updates.
Get started with Tulip's Edge Devices
-
-
Factory Kit with Edge IO
Factory Kit is the easiest way to start building IoT-enabled apps.
Buy Factory Kit
Specifications for I/O Gateway
I/O Gateway is easy to set up and use.
Connect your hardware to Tulip with inputs: 16 Digital PNP/NPN configurable inputs, 8 500mA 24V output drivers, 4 Linearly isolated 0-10V inputs, 1 RS-232 port using RX and TX lines, 6 USB 2.0 ports
I/O Gateway is plug & play with devices
Connect devices to your apps using Tulip’s no-code editor. Use barcode scanners, scales, cameras, smart tools and more.
Tulip hardware connects your frontline operations
Check out the full list of technical specifications for I/O Gateway.
| Features | Voltage Supply | Mechanical Specifications | Digital Specifications | Port Specifications |
|---|---|---|---|---|
| Reverse polarity protection | Nominal supply: 24V (Vin_min: 12V Vin_max: 30V) | 220mm x 160mm x 51mm (8.6in x 6.5in x 2in) | Digital input; 16 Digital PNP/NPN configurable inputs; Wide input range (1.8V–36V); Digital input ground is connected to device 24V return; IC: MCP23017 | RS-232 port; 1 RS-232 port using RX and TX lines; Wide input range (1.8V–36V); Support for additional physical interfaces (RS-485, RS-422); IC: ADM3251 |
| Overcurrent protection | Nominal supply current: 250mA (dependent on USB devices connected) | Weight: 2.2kg (4.9 lbs) | Digital output; 8 500mA 24V output drivers; Individual channel over-temperature and over-current protection; Drives relays and other inductive loads safely; IC: VN808 | USB; 6 USB 2.0 (high speed 480 Mbit/s) ports; 500mA current sourcing per port |
| Miswire and reverse current protection | Nominal power consumption: 6W | Aluminum (Anodized) | Analog to digital; 4 linearly isolated 0-10V inputs; 10-bit effective resolution; Bandwidth (nominal): 240Hz; IC: ADS1015 | |
| Surge protection | Under-voltage lockout: 11.5V | User serviceable 35mm DIN mount | ||
| Over-voltage lockout: 30.5V |
-
Intuitive configuration
Configure your devices to your I/O Gateway through an easy-to-use interface.
-
Connect with your apps
Guide digital workflows and monitor machines in apps with the I/O Gateway and logic.
-
Accessible hardware connectivity
Need wireless connectivity? Have custom devices? Tulip’s Edge MC with Node-RED can help.
Digitally transform your operations with Tulip
See how systems of apps enable agile and connected operations.